Agri Slurry Tankers
Engineered for the demands of modern agriculture, the Major Agri-Spec Tanker range combines rugged durability with intelligent safety features, built to provide reliable performance in the most challenging conditions, these tankers are available in capacities ranging from 1500 to 2000 gallons, offering the perfect balance of volume & manoeuvrability.
The LGP models have hydraulic brakes as standard ensuring compliance with the regulations for this model of tanker. Rubber buffers are fitted as standard on the drawbar to give a smoother and safer journey. These tankers are galvanised as standard.
Features
-
Choice of Agri and LGP models
-
Joints on the tank are welded to ensure a high-quality and visually perfect weld seam
-
Hydraulic brakes as standard ensuring compliance with the regulations for this model of tanker.
-
Drawbar is fitted with rubber buffers to give a smoother and safer journey.
-
Fitted with safety breakaway cable for safer use on public highways.
-
Detachable parking stand
-
PTO holder
Alpine Tanker
The Major Alpine Tanker is a premium, high-capacity solution specifically engineered for the professional contractor & large-scale producer. Built for performance where others struggle, its unique design prioritizes stability & soil protection without compromising on volume.
Superior Stability & low centre of gravity the hallmark of the Alpine Tanker is its innovative dropped axle design. By setting 340mm lower than standard LCP Tankers, it achieves an exceptionally low centre of gravity. Thus, translates to unmatched stability, on sloping terrain & significantly reduced ground pressure, ensuring minimal soil compaction& turf damage-even in challenging wet conditions.
Available: 2150, 2300 and 2670 gallons
-
Heavy duty dropped commercial specification axle.
-
Hydraulic braking system as standard
-
Internal baffle plates prevent wave motions during transport.
-
Safety breakaway cables for safer use on roadway
-
Rubber buffers on drawbar for smoother journey
-
Swivel hitch and foldable PTO stand.
-
Full road lighting kit
-
Choice of painted or galvanised finish
Cyclone Mower
The Major Cyclone Mower is the ultimate heavy-duty solution for land management, engineered to outperform & outlast traditional flail mowers. From pasture topping & crop stubble clearing to the most demanding scrubland reclamation & forestry margin control, the cyclone is the professional’s choice for the toughest environments.
Its patented ‘blender’ double-chop blade system requires 25% less HP than a flail mower, slashing at least 25% off upfront fuel costs. The Major Cyclone is the mower of choice for the toughest jobs.
Features
-
Save a minimum of 25% on power consumption and fuel costs.
-
Unique blade system for maximum mulching and shredding
-
Ideal for post-harvest shredding and mulching to eliminate the over wintering of corn borer larvae.
-
Low maintenance machine with less wearing parts than a flail mower
-
Impressive forward speeds
-
No wind rowing.
-
Heavy duty full-length rear roller
-
Can be front or rear mounted (to be specified when ordering)
-
The undersole discs are produced from Hardox® 450.
-
Even distribution of cut material.
Slasher
The MAJOR Grass Slasher is single rotor machine designed for general pasture maintenance and overgrown sites. It is ideal for topping grasses, weeds, rushes, heather, light scrub and hardy vegetation. These machines are perfect for small holdings and suitable for most compact and medium-sized tractors.The slasher is fitted with two heavy duty swinging blades fixed on a compound blade beam. Heavy duty gearbox transfers power directly to the blade system, which is capable of tackling material up to 30mm in diameter. It also requires little maintenance compared with belt-driven systems.
A shearbolt PTO protects the driveline in the event of hitting an obstacle whilst mowing. The cutting height is set by adjusting the two side skids. The skids have wide runners preventing
Features
-
Two heavy duty swinging blades on a compound blade beam.
-
Undersole discs to protect blade system.
-
Shearbolt PTO shaft for enhanced safety
-
Adjustable cutting height 20mm – 180mm
-
Fully galvanised finish
Topper
The MAJOR Centre Mounted Grass Topper is a fully gear driven machine fitted with high-speed rotors and twin cut swinging blades. The MJ55-270 is a heavier duty version of the 9FTGDXHD topper and features extra heavy-duty gearboxes.
A shearbolt PTO shaft is supplied as standard for best power transfer.
There is the option available of an overrun and slip clutch PTO.
Features
-
Twin cut swinging mulching blade system.
-
Four blades per rotor for maximum mulching
-
Heavy duty transmission
-
Rubber shock absorbers between rotor gearboxes
-
Low maintenance – no belts or pulleys
-
Galvanised finish as standard
Flex-Wing Topper
The MAJOR Flex Wing Topper is a three-point linkage mounted machine which folds up to 2.3m (7’ 6”) transport width. Like all MAJOR machines, the Flex Wing Topper is of robust construction. CE conformity is achieved through full PTO guarding and heavy rubber skirting to prevent debris from escaping.
The wing cutting decks are raised by hydraulic control to transport position. The wings are capable of flexing from -15 to +25 degrees allowing the cutting unit to follow the ground contours. Contra-rotating swinging blades are retained in hardened steel bushings and clamped by sprung steel blade backs. Under-sole discs are fitted to prevent scalping and ensure a perfect finish every time.
Features
-
Galvanised finish
-
Robust pivot points
-
Rubber shock absorbers
-
Shearbolt PTO protection
-
Hydraulic wing lift
-
ProCut swinging blades.
-
88mm (3 1/2”) blade overlap to eliminate striping.
Major Hedge Cutter
The Major Hedge Cutter head produces a clean presentation on hedgerows, shrubs and verges at fast forward speeds thanks to the impressive ‘blender-style’ mulching capabilities of the rotary head. The gearbox driveline powers twin rotors and eight overlapping blades to deliver a tidy finish when thinning material or clearing dense brush, all in one pass.
The hydraulic motor is fitted with an overrun clutch, protecting the hydraulic system when the motor stops. The 1.43m heavy duty deck really shines turning overgrown hedges and scrubby areas into manageable structures for landscape control.
Features
-
There are four blades per rotor for cutting and mulching excellence.
-
Hydraulic motor fitted with overrun clutch, requiring 80-110 L/min hydraulic flow and max 170 bar of pressure.
-
Less wearing parts than flailhead systems, low maintenance
-
Strenx® high-performance steel components
-
Hardox® wear and abrasion resistant skids
-
Full length rear roller to limit scalping for verge work, can be moved out of the way for hedge cutting.
-
Adjustable front hood (hydraulic or manual) to control amount of material being cut (1.43 models)
Side Mounted Topper
There are two versions of the MAJOR Side Mounted Topper available. The 800SM-HD and 900SM-HD models fold horizontally behind the tractor. The MJ40 series folds up vertically for transport.All models are fully offset three point linkage pasture toppers. Features include hydraulic offset with an integrated hydraulic breakaway protecting the tractor from impact damage. The floating top link ensures the cutting deck hugs the ground contours with the damper bar removing any lateral vibration. A shearbolt PTO shaft is supplied as standard for best power transfer. There is the option available of an overrun and slip clutch PTO.
Features
-
Fully galvanised body
-
Heavy duty transmission
-
Full hydraulic offset control
-
Hydraulic breakaway system
-
High lift twin-cut ProCut swinging blades
-
Rubber shock absorbers between rotor gearboxes
-
No wheel markings
Verge Mower
The Major Offset Mower is designed for intensive cutting requiring agility and durability. The hydraulic headstock offers 140 degrees of movement for cutting verges, ditches, embankments, as well as shrubs, hedges and trees. The 1.56m offset mode suits mowing around fences, buildings and under trees. The rotary blade system delivers precision cutting and dispersion of material, while offering maximum protection against breakage an driveline damage. Heavy duty gearbox with shock absorbers safeguards the machine in the event of a collision. Full length roller follows ground contours to give a perfect finish.
Available in 1.4m and 2.19m working widths, the Offset Mower is made of high-performance Strenx™ steel and galvanised for the ultimate protection against corrosion.
Features
-
Unique blade system for extreme cutting and protection. In the event of a hitting an obstacle, the blades retract upwards out of the line of impact preventing breakages and damage to gearboxes and driveline.
-
Hydraulic arm can operate from 95° to -35°
-
Internal double roller bearing housing to support full-length roller while cutting and protect the bearings.
-
Heavy duty gearboxes with inter gearbox shock loading protection to protect the machine in the event of a collision.
-
Rubber skirting to protect against flying debris.
-
Simple height adjustment from 15-100mm.
-
Available in left or right-hand configurations
-
Fuel efficient and low maintenance machine requires less wearing parts than flail mower.
-
Produced using high-performance Strenx™ 700MC steel and galvanised.
-
Support wheel supplied as standard.
Major Bench Saw
The MAJOR Swinging Saw Bench is a robust PTO-driven tractor attachment designed for efficient and safe cutting of logs and timber. It fits onto the tractor’s 3-point linkage and can cut material up to 28 cm (11") in depth.
Key Features:
- PTO-driven and designed to fit a tractor’s 3-point linkage.
- Cutting capacity of up to 28 cm (11").
- Fitted with a depth gauge for accurate and consistent cutting.
- Includes an extension piece for supporting longer logs.
- Equipped with wheels for easy movement around the yard or work area.
- Extending handle allows the machine to be easily towed by hand into storage.
- Designed with operator safety in mind.
- Both hands are required to secure the material and operate the swinging bench, helping keep the operator at a safe distance from the blade.
- A red pedal at the base of the machine allows the saw blade to be isolated from the PTO drive when required.
- Ideal for cutting logs and timber efficiently on the farm, yard or workshop.