Combi Bowser
The Cashel’s range of Combi Fuel Bowsers has been designed and manufactured for the safe storage and legal transportation of fuels. All models are UN-approved to comply with the International Carriage of Dangerous Goods regulations (ADR) and 110% Bunded to comply with Environmental Protection regulations. The chassis mounted Bunded Fuel Bowsers also have EC Whole Vehicle Type Approval (ECWVTA).
The ADR-certified diesel tanks are manufactured from 4mm mild steel, while the AdBlue tanks are manufactured from 2.5mm stainless steel.
Key Features
- ADR-certified IBC (4mm mild steel, pressure tested)
- Bunded design to contain potential leaks
- Stainless steel AdBlue tank housed in a mild steel cabinet (front-mounted)
- Lockable hinged hatch with filling point, pressure relief valve, and dipstick (fully removable for inspection)
- Diesel system: 12v pump (55lpm), 3-digit flow meter, 6m hose
- AdBlue system: 12v pump (40lpm), inline flow meter, delivery hose & nozzle
- Integrated fire extinguisher within bund area
- Galvanised chassis and mudguards
Single Skin Fuel Bowser
The Cashel range of Single Skin High-Speed Fuel Bowsers has been designed and manufactured for the safe storage and legal transportation of fuels.
Key Features:
-
ADR-certified intermediate bulk container (IBC) - manufactured from 4mm mild steel and pressure tested.
-
Filling point, pressure relief valve and dipstick beneath a hinged, lockable hatch.
-
Hatch is completely removable to allow periodic inspection of the inside of the bowser.
Securely contained diesel fuelling system - 12v DC fuel pump (55lpm flowrate), 3-digit flow meter, 6m of delivery hose.
4 Wheel Chassis
The 4-Wheel Chassis is designed to be retrofitted to the McHale Fusion Baler/Wrapper unit. The design is compatible with the Fusion 2, Fusion 3 and the newer Fusion 4 models in all variants.
The main feature of the chassis is that it reduces the overall ground pressure by 40%+ when operating in wet conditions. On softer ground, the chassis also increases stability while minimising ground damage. The two centre wheels have 20mm ground clearance when the Fusion is traveling on road and when operating in normal conditions.
Key Features:
-
Suits McHale Fusion 2, 3 & 4 (all variants)
-
Hydraulic brakes on the outer FAD stub axles (Standard units).
-
8-Stud outer braked stub axles (FAD).
-
6-Stud inner unbraked stub axles (FAD).
-
Chassis fabricated from fine grain steel throughout.
-
High quality paint finish to match the Fusion.
-
Stacking brackets for transport and shipping.
-
Centre wheels: TIANLI Flotation Radial 500/50R17
Single Duck Foot
The Ducks Foot Bale Handler is suitable for transporting both round and square bales of straw, haylage and silage. Its “Ducks Foot” paddles rotate on CAT 2 stone fork tines and can easily be removed, allowing the unit to be used for spiking round bales during the winter and for transporting square bales of straw and haylage.
Key Features:
-
Handles sagged or misshapen wrapped bales.
-
Capable of handling bales up to 1500mm (5’) in diameter.
-
CAT 2 stone fork tines for spiking round and square bales.
-
Hot-dip galvanised paddles for long life.
-
Rotating paddles to cradle the bales during transport.
-
3-point Linkage as standard, various linkage options available.
Double Duck Foot
This design, with its uniquely shaped, galvanised “Ducks Foot” paddles can handle sagged or misshapen silage bales without causing damage to the bale film. The Ducks Foot Bale Handler is suitable for transporting both round and square bales of straw, haylage and silage. Its “Ducks Foot” paddles rotate on CAT 2 stone fork tines and can easily be removed, allowing the unit to be used for spiking round bales during the winter and for transporting square bales of straw and haylage.
Key Features:
-
Designed for handling sagged or misshapen wrapped bales.
-
Capable of handling bales up to 1500mm (5’) in diameter.
-
CAT 2 stone fork tines for spiking round and square bales.
-
Hot-dip galvanised paddles for long life.
-
Rotating paddles to allow bales to be tipped on their end.
-
3-point Linkage as standard (various linkage options available).
Double Vari Width
The Cashel’s Hydraulic Vari-Width Double Bale Handler has been developed for the farmer/contractor who needs to transport large volumes of round, wrapped silage bales from the field to the storage area. It has been designed to manage, transport and stack both 4ft and 5ft.
Key Features:
-
The rollers can easily be removed allowing the unit to be used for spiking bales.
-
Collects and transports two wrapped silage bales.
-
Heavy-duty construction.
-
Can be used on front or rear 3-point linkage.
-
Hot-dip galvanised roller tubes.
-
Handles sagged or misshapen bales.
-
Single Vari-Width model also available
4 Bale Transporter
The Cashel’s 4-Bale Transporter has been developed to increase the efficiency of transporting round dry bales (straw/hay) from the field to the storage area. It is designed for use on the 3-point linkage of larger horsepower tractors.
The unique design incorporates a double mast section which is hydraulically operated for loading and unloading the bales. The hydraulic downstroke of the mast also acts as a clamping mechanism to secure the four bales during transportation.
Key Features:
-
Robust construction using structural steel.
-
CAT-2 stone fork tines with hot-dip galvanised paddles on the base.
-
CAT-1 stone fork tines for easy penetration of bales on the masts
-
Double-acting hydraulic mast for loading/unloading bales.
-
Double-acting hydraulic mast for clamping bales during transport.
-
Main frame design ensures clear view for operator during loading/unloading of bales.
The Double Pick Up & Stack
The Pick & Stack Double Bale Handler is designed to minimise the time from field to storage area, without compromise to the bale integrity. The unit contains a telescopic mast in conjunction with a Ducks Foot Bale Handler. Both sides of this product can be independently moved using heavy duty hydraulic cylinders. This allows the operator to lift the first bale, while lowering the implement to collect the second without tearing the plastic of the first bale.
Key Features:
-
Transports and stacks two round bales.
-
Loads & unloads bales to and from a bale trailer.
-
Handles mature bales during feeding season.
-
Handles misshapen/sagged bales.
-
Heavy duty construction throughout.
Over Arm Bale Grab
The Cashel’s Overarm Universal Bale Grab has been developed for transporting and stacking both round and square bales of silage, straw, and hay. The overarm is fitted with rotating tubes for smooth handling of wrapped bales. It is designed for use on tractor front loaders and industrial loaders. The overarm design allows bales to be handled from both directions, while ensuring maximum clamping force through the double-acting hydraulic cylinder.
The unique design of Cashel’s’ Overarm Universal Bale Grab incorporates a removeable clamping frame. This feature allows the option of fitting CAT-2 stone fork tines for handling bales during the feeding season. It also allows the fitting of two Ducks Foot Paddles for safely transporting round silage bales.
Key Features:
-
Robust frame and overarm design.
-
Double acting hydraulic cylinder with check valve.
-
Rotating tubes fitted too overarm.
-
Removable clamping frame to allow the fitting of optional tines for handling bales during the feeding season.
Single Pick & Stack
The Cashel’s Pick & Stack Bale Handler has been developed to cater for the transportation & stacking of wrapped bales without causing damage to the film. A hydraulic top link is required when operating the Pick & Stack Bale Handler.
The unit contains a telescopic mast in conjunction with a Ducks Foot Bale Handler. The unique design allows the unit to be used for stacking wrapped bales two-high at the storage area as well as for loading and unloading bales to and from a trailer. During the winter period the unit can be used for handling/loading mature round bales into feed trailers and stock feeders.
Key Features:
-
Transports & stacks bales two-high.
-
Loads & unloads bales to and from a bale trailer.
-
Handles mature bales during feeding season.
-
Handles misshapen/sagged bales.
-
Heavy duty construction throughout.
Hydraulic Bucket Grab
The Hydraulic Bucket Grabs are designed for use on tractor loaders. Bucket Grabs have become the most popular tool fitted to tractor loaders because of their versatility in handling all types of material across a broad range of sectors.
Cashel’s Bucket Grabs have been designed for use in the agricultural, amenity, construction, and recycling sectors. The bucket section is uniquely designed for optimum strength and durability with removable sides for increased versatility when required. The fork grab section is also uniquely constructed and is fitted with curved stone fork tines.
Key Features:
-
Unique design for optimum strength and durability.
-
CAT 1 stone fork tines & bushings. (Optional CAT 2 tines available upon request).
-
Hardened cutting edge fitted to bucket section.
-
Removable sides on bucket section for increased versatility.
-
Tine Lengths: 680mm (27”).
-
Tine Centres: 300mm (12”).
Available in:
-
1500, 1700 & 2000 Models
Hydraulic Fork Grab
The Hydraulic Fork Grab is designed for use on tractor loaders. Cashel’s Fork Grabs are extremely versatile tools and have many uses in the agricultural, amenity and recycling sectors. Suited for handling bedding material and manure from barns and stables, rehandling of hay, straw, and silage during the feeding season. Fork Grabs are also suitable for managing brush, hedging and forestry thinning’s. They are also widely used in the recycling sector for managing all types of waste material.
Key Features:
-
Unique design for optimum strength and durability.
-
CAT 1 stone fork tines & bushings. (Optional CAT 2 tines available upon request)
-
Various linkage options available.
Available in:
-
1250, 1500, 1700 & 2000 Models
Tipping Bale Handler
The Tipping Bale Handler is a time proven concept which was developed by Cashel’s over 35 years ago to assist local farmers who required a solution for transporting wrapped bales of silage. The design incorporates a trip latch, allowing the user to tip wrapped bales of silage on their ends without causing any damage. Developed for use on 3-Point tractor linkage.
Key Features:
-
Heavy duty construction.
-
High-quality paint finish.
-
Straight-forward design for ease of use.
-
Tried and tested for over 35 years.
Bale Spike
The Bale Spike from Cashel’s is a very affordable option for transporting unwrapped bales from the field to the wrapping area. The Bale Spike is also used for handling/transporting round and square bales of hay and straw from the field during feeding season. Suitable for use on 3-Point linkage systems and tractor front loaders.
Key Features:
-
Heavy-duty construction throughout.
-
High-quality paint finish.
-
Straight-forward design.
-
CAT 2 stone fork tines for spiking round or square bales.